Table of Contents
Advertisement
Kia Carens
Final Work
WARNING!
Reassemble the components in reverse order. Check all hoses, clamps and all electrical connections
for firm seating. Insulate all loose lines and tie back.
Only use manufacturer-approved coolant. Spray the heater components with anti-corrosion wax
(Tectyl 100K, Order No. 111329).
• Connect the battery
• Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
• Set the digital timer, teach telestart transmitter
• Make settings on A/C control panel according to the "Operating Instructions for End Cus-
tomer".
• Place signboard "Switch off parking heater before refuelling" in the area of the filler neck
• See installation instructions for initial start-up and function test
1
455
1
Ident. No.: 1321247A_EN
2
77
76
77
2
Status: 13.09.2013
1 Underride protection
2 60 mm dia. hole
Centrally align exhaust end section 2 in hole
and so that it is flush with underride
protection 1 .
Cutting out
underride
protection
Aligning
exhaust
end section
Webasto Thermo & Comfort SE
Postfach 1410
82199 Gilching
Germany
Internet: www.webasto.com
Technical Extranet:
http://dealers.webasto.com
© Webasto Thermo & Comfort SE
34
Hide quick links:
Advertisement
Table of Contents
