Final Work - Webasto Thermo Top E Installation Documentation

Final Work

WARNING!
Mount removed parts in reverse order. Check all hoses, clamps and all electrical connections for firm
seating. Insulate all loose wires and tie back.
Only use manufacturer-approved coolant. Spray heater components with anti-corrosion wax (Tectyl
100K, Order No. 111329).
- Connect the battery.
- Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
- Adjust digital timer, teach telestart transmitter
- Make settings on A/C control panel according to the "Operating Instructions for End Cus-
tomer".
- Place signboard "Switch off parking heater before refuelling" in the area of the filler neck
- See installation instructions for initial start-up and function test
1314460B_EN
Citroen Berlingo / Peugeot Partner
Printed in Germany
Feel the drive
09/2011 Printing: Steffen
24