Final Work - Webasto Thermo Top Evo Installation Documentation

Final Work

WARNING!
Mount removed parts in reverse order. Check all hoses, clamps and all electrical connections for firm
seating. Insulate and tie back all loose wires.
Only use manufacturer-approved coolant. Spray heater components with anti-corrosion wax (Tectyl
100K, Order No. 111329).
- Connect the battery.
- Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications.
- Adjust digital timer, teach Telestart sender
- Make settings on A/C control panel according to the "Operating Instructions for End Cus-
tomer".
- Place signboard "Switch off parking heater before refuelling" in the area of the filler neck
- See installation instructions for initial startup and function check
1
2
1
2
1316981B_EN
Ford Focus / C-Max / Grand C-Max
1 Underride protection
2 60 mm dia. hole
240
85
64
Mount underride protection of engine 1 . Align
exhaust end section 2 flush on underride pro-
tection 1 . Ensure sufficient distance from
neighbouring components.
65
Printed in Germany
Feel the drive
Webasto AG
Postfach 80
D-82132 Stockdorf / Germany
National Hotline: 01805 93 22 78
(14 Cent aus dem deutschen Festnetz)
Hotfax: 0395 5592 353
Hotmail: technikcenter@webasto.com
http://www.webasto.com
01/2012 Printing: Steffen
Cutting out
underride
protection
Aligning
exhaust
end sec-
tion
28