Final Work; Adaptation Of Climatronic J255 Control Unit - Webasto Thermo Top Evo Installation Documentation

Audi A6 / A6- Avant / Audi A7 Sportback

Final Work

WARNING!
Reassemble the disassembled components in reverse order. Check all hoses, clamps and all electrical
connections for firm seating. Insulate and tie back all loose lines.
Only use manufacturer-approved coolant. Spray the heater components with anti-corrosion wax
(Tectyl 100K, Order No. 111329).
• Connect the battery
• Fill and bleed the coolant circuit according to the vehicle manufacturer's specifications
• Program MultiControl CAR, teach Telestart transmitter
• Make settings on A/C control panel according to the "Operating Instructions for End Cus-
tomer".
• Place the "Switch off parking heater before refuelling" caution label in the area of the filler
neck.
• For initial start-up and function check, see installation instructions.

Adaptation of Climatronic J255 Control Unit

with VAS-VCDS
Function:
• Control unit selection
• 08 AC-heater electronics
• Adaptation > „activate retrofit parking heater without CAN"
Save
3
Ident. No.: 1317500E_EN
1
85
2
Status: 19.03.2015
Only if installing time-delay relay
Align relay socket 2 with glove compartment
trim and glove compartment cap lever 3.
1 Time-delay relay mounted
Aligning
time-delay
relay sock-
et
Webasto Thermo & Comfort SE
Postfach 1410
82199 Gilching
Germany
Internet: www.webasto.com
Technical Extranet:
http://dealers.webasto.com
© Webasto Thermo & Comfort SE 32