Overall dimensions
Mounting dimensions
Depth
Weight
BACnet support
Listed by
MPC Open XPIO48 and MPC Open XPIO816 specifications
Power
Inputs
Input resolution
Input pulse frequency
Outputs
Output resolution
Microprocessor
MPC Open XP
MPC Open XPIO48/816
Installation and Start-up Guide
A:
11-5/16 in. (28.7 cm)
B:
7-1/2 in. (19 cm)
C:
10-7/8 in. (27.6 cm)
D:
1-1/4 in. ( 3.2 cm)
E:
2-1/2 in. ( 6.4 cm)
F:
1/4 in. (.6 cm)
1-7/16 in. (3.7 cm)
1.7 lbs (0.8 kg)
Conforms to the BACnet Building Controller (B-BC) Standard Device Profile as
defined in ANSI/ASHRAE Standard 135-2012 (BACnet) Annex L, Protocol
Revision 9
UL-916 (PAZX), cUL-916 (PAZX7), FCC Part 15-Subpart B-Class A
MPC Open XPIO48
24 Vac ±10%, 50–60 Hz
40 VA power consumption
26 Vdc (25 V min, 30 V max), 21 W
Single Class 2 source only, 100 VA or less
MPC Open XPIO816
24 Vac ±10%, 50–60 Hz
45 VA power consumption
26 Vdc (25 V min, 30 V max), 21 W
Single Class 2 source only, 100 VA or less
MPC Open XPIO48
8 inputs, configurable for 0–5 Vdc, 0–10 Vdc, 0–20 mA, RTD, thermistor, or dry
contact
MPC Open XPIO816
16 inputs, configurable for 0–5 Vdc, 0–10 Vdc, 0–20 mA, RTD, thermistor, or dry
contact
14 bit A/D
40 pulses per second. Minimum pulse width (on or off time) required for each
pulse is 12.5 msec.
MPC Open XPIO48
4 outputs for 24 Vdc relay driver, 0–10 Vdc, or 0-20 mA
MPC Open XPIO816
8 outputs for 24 Vdc relay driver, 0–10 Vdc, or 0-20 mA
12 bit D/A
8-bit microprocessor with 60 kB Flash memory, 2 kB SRAM, and CAN controller
5
Introduction
CARRIER CORPORATION ©2019
All rights reserved