Table of Contents
Advertisement
Introduction
Protection
Status indicators
Environmental operating
range
Storage temperature range
Physical
Overall dimensions
Mounting dimensions
(in a panel)
Depth
Weight
Listed by
Safety considerations
WARNING Disconnect electrical power to the MPC Open XP before wiring it. Failure to follow this warning
could cause electrical shock, personal injury, or damage to the controller.
MPC Open XP
MPC Open XPIO48/816
Installation and Start-up Guide
Built-in surge and transient protection for power and communications in
compliance with EN61000-6-1.
Incoming power is protected by 2 replaceable 3 Amp Pico
network, input, and output connections are protected against transient excess
voltage/surge events lasting no more than 10 msec.
LEDs indicate status of communications, running, errors, and outputs.
-20 to 140°F (-29 to 60°C), 10–90% relative humidity, non-condensing
NOTE Install in a UL Listed enclosure only.
-24 to 140°F (-30 to 60°C), 0 to 90% relative humidity, non-condensing
Rugged aluminum cover, removable screw-type terminal blocks
A:
9 in. (22.9 cm)
B:
4-13/16 in. (12.2 cm)
C:
8-5/8 in. (21.8 cm)
D:
1 in. (2.5 cm)
E:
2-13/16 in (7.1 cm)
F:
1/4 in. (.6 cm)
1-7/16 in. (3.7 cm)
13.3 oz. (.377 kg)
UL-916 (PAZX), cUL-916 (PAZX7), FCC Part 15-Subpart B-Class A, CE
6
®
fuses. The power,
CARRIER CORPORATION ©2019
All rights reserved
Advertisement
Table of Contents
