Static Ip - D-Link Router User Manual

Section 3 - Configuration
Static IP Address
Select Enable to enable the connection or Disable to disable the
State of
Connection:
connection.
NAT: Disabling this option will disable the NAT firewall function of
the DWR-961, exposing all connected devices directly to the
Internet. This is an advanced feature and not recommended for
normal use.
DNS Enabled: Enables DNS lookup.
DNS Override Check this box override the DNS provided by the DHCP lease.
Allowed:
Normally, connections using Dynamic IP/DHCP should not need
this.
DNS Server
Fill in if provided by your ISP. If not, keep the default value
1/2
(optional).
MAC Address:
The default MAC address is set to the WAN port's physical
interface MAC address on the router. It is not recommended that
you change the default MAC address unless required by your ISP.
You can use the Clone button to replace the WAN port's MAC
address with the MAC address of your PC.
Wan Ping
Check this box to have the router respond to WAN pings. This is
Enable:
not recommended.
Click Apply to save your settings, or Cancel to revert to your previous settings.
D-Link DWR-961 User Manual

Static IP

18