D-Link Router User Manual page 32

Section 3 - Configuration
MAC Address: The default MAC address is set to the WAN port's physical
interface MAC address on the router. It is not recommended that
you change the default MAC address unless required by your ISP.
You can use the Clone button to replace the WAN port's MAC
address with the MAC address of your PC.
Wan Ping Check this box to have the router respond to WAN pings. This is
Enable:
not recommended.
If you previously selected Bridge Mode (RFC-1483 Bridged), click Next to continue.
Once your network connection has been configured, you will be directed to configure
your wireless connection.
Enter a Wireless Network Name (SSID), choose a wireless channel (optional), and a
wireless mode (optional), then click Next to continue.
D-Link DWR-961 User Manual 27