Table of Contents
Advertisement
Section 3 - Configuration
PPPoE (RFC-2516 PPP over Ethernet)
State of
Select Enable to enable the connection or Disable to disable the
Connection:
connection.
IPMode of
Specify a Static or Dynamic IP address.
Connection:
IP Address:
If you have selected Static IP, enter the IP Address provided by
your ISP or network administrator.
Subnet Mask:
If you have selected Static IP, enter the subnet mask provided by
your ISP or network administrator.
NAT:
Disabling this option will disable the NAT firewall function of
the DWR-961, exposing all connected devices directly to the
Internet. This is an advanced feature and not recommended for
normal use.
Authentication
Specify if the connection is authenticated with PAP (Password
Method:
Authentication Protocol), CHAP (Challenge -Handshake
Authentication Protocol), or MS-CHAP (Microsoft Challenge
Handshake Authentication Protocol). This setting is determined
by your ISP or network administrator.
User Name:
The username provided by your ISP for your PPPoE account.
User Password:
Password provided by your ISP for your PPPoE account.
Confirm
Re-type your password in this field.
Password:
D-Link DWR-961 User Manual
PPPoE (Username / Password)
14
Advertisement
Table of Contents
