Static Ip - D-Link SharePort Go II DIR-508L User Manual

Section 4 - Configuration
Depending on your Internet Service Provider, you may need to configure the static IP settings in order to connect to the Internet.
You may need to contact your service provider for this information. Click Save to store your settings.
My.Internet Select Static IP from the drop-down list.
Connection.Is:
IP.Address:
Enter the IP address assigned by your ISP.
Subnet.Mask:
Enter the Subnet Mask assigned by your ISP.
Default.Gateway:
Enter the Gateway assigned by your ISP.
Primary
Enter the Primary DNS Address assigned by your ISP.
DNS.Address:
ADVANCED.SETTINGS
Secondary
Enter the Secondary DNS Address assigned by your ISP.
DNS.Address:
MTU:
Maximum Transmission Unit - you may need to change
the MTU for optimal performance with your specific ISP.
1500 is the default MTU.
D-Link DIR-508L User Manual

Static IP

92