D-Link Router User Manual page 26

Section 3 - Configuration
The subsequent configuration pages will differ depending on the selection you
make on this page.
Internet Settings
PPPoE Choose this option if your Internet connection requires a
(RFC-2516
username and password to connect. Most DSL modems use
PPP over this style of connection. See PPPoE (Username / Password) on
Ethernet):
page 14 for information about how to configure this type of
connection.
Dynamic Choose this if your ISP automatically provides you with an IP
IP Address
address. Most cable modems use this type of connection. See
(IPoEoA/ Dynamic IP (DHCP) on page 17 for information about how to
MER(MAC
configure this type of connection.
Encapsulated
Routed) with
DHCP):
Static IP Choose this option if your Internet Service Provider (ISP)
Address:
provided you with IP address information that has to be
manually configured. See Static IP on page 18 for information
about how to configure this type of connection.
Bridge Mode
Choose this option to use the DWR-961 as a network bridge. For
(RFC-1483 details see Bridge Mode (RFC-1483 Bridged) on page 19.
Bridged):
After entering the requested information,click Next to continue.
Note: If you are not sure what connection type to use or what settings to enter, check
with your Internet Service Provider (ISP).
D-Link DWR-961 User Manual 21