Firewall; Parent Control Filter - D-Link Router User Manual

Section 3 - Configuration
The Parent Control Filter allows you to enable Internet connectivity for some devices on a fixed schedule. Note that for the dates to be effect, the
date, time, and time zone must be set correctly in Time Settings on page 103. Devices can be listed multiple times, and will be granted internet
connectivity during all dates and times listed.
Parent When Parent Control is set to Enable, devices listed in the
Control:
Current Parent Control Table will only be able to access the
Internet on the specified days during the specified times.
Click Apply to save your settings.
Internet Access Policy
Date:
Select a day(s) of the week when Internet access will be permitted.
Time:
Specify a time during the specified days when Internet access
will be permitted. The time must be specified in 24 hour HH:MM
format, where 10 AM would be 10:00 and 10 PM would be 22:00.
Specified PC:
You can specify whether the filters will be applied to devices by
MAC Address or by IP Address. Note that by default, LAN IPs are
dynamic.
IP Address: If you have specified IP Address above, enter an IP address
range to which this filter will apply. You can check addresses of
currently connected devices using the Clients sections under
Status on page 113.
D-Link DWR-961 User Manual

Firewall

Parent Control Filter

63