Wps - D-Link Router User Manual

Section 3 - Configuration
The Wi-Fi Protected Setup page allows you to create a wireless connection between your router and a device automatically by simply pushing a
button or entering a PIN code.
Basic Setting
Enable WPS:
Check this box to enable pairing via WPS
Device If you use Windows 7's Connect to a network wizard to do
Password
initial configuration of the router, you will have the option to
(PIN):
enter the WPS PIN/AP PIN into the wizard when prompted. The
factory default WPS PIN/AP PIN is printed on a label located on
the bottom of the router. You can click the Generate New PIN
button to change it to a randomly generated PIN. Note that the
PIN is provided for compatibility purposes only, and has minimal
functionality for your protection.
Configuration If this is set to CONFIGURED, the router will be marked as
State:
"already configured" to computers that try to use WPS-PIN
configuration, such as Windows 7's Connect to a network
wizard. For your protection, the CONFIGURED flag is
permanently set in order to close vulnerabilities in the WPS-PIN
configuration.
Auto-lock- Auto-lock-down is activated when a device attempts too many
down State unsuccessful PIN-based WPS pairing attempts.
Click Apply to save your settings, or Cancel to revert to your previous settings.
D-Link DWR-961 User Manual

WPS

51