Mld - D-Link Router User Manual

Section 3 - Configuration
The Multicast Listener Discovery (MLD) is a communications protocol used by hosts and adjacent routers on IPv6 networks to establish multicast
group memberships. Multicast allows for the transmission of identical content, such as multimedia, from a source to a number of recipients, and is
commonly used for applications like IP TV. This setting should be disabled unless you use a service that explicitly relies on multicast.
MLD Option: Select Disable, Proxy, or Snooping. If you select Disable, no
additional configuration is required.
If you have selected Proxy:
Interface: Specify a WAN interface over which the
Connected Specify connected interfaces. This option is greyed out for 4G
Interfaces:
connections.
Fast Leave: Check the box to enable the fast leave feature.
Drop Unknow Check this box to drop unknown streams.
Stream:
Query The query interval is the amount of time in seconds between
Interval: General Query messages sent by the router (if the router is
querying on this subnet).
Robust Set robustness value to account for packet loss on congested
Count: networks.
D-Link DWR-961 User Manual

MLD

86