Table of Contents
Advertisement
Section 3 - Configuration
This page allows you to configure low-level features of the LAN Ethernet ports.. These features are intended for advanced users and network
professionals only, and can safely be ignored by most users.
Interface:
Indicates the LAN interface.
Enable:
Check this box to enable this Ethernet port. This setting is
enabled by default.
LinkMode:
Indicates the speed and duplex mode used by the Ethernet port.
The default and recommended setting is Auto.
FlowCtrl:
Check this box to enable flow control on the connection. This
setting is only available in some modes.
Click Apply to save your settings.
D-Link DWR-961 User Manual
Ethernet Settings
91
Advertisement
Table of Contents
