D-Link Router User Manual page 90

Section 3 - Configuration
Query
The query response interval is the maximum amount of time in
Response
seconds that the router waits to receive a response to a General
Interval:
Query message. It is the Maximum Response Time field in the
message header. The default query response interval is 10
seconds and must be less than the query interval.
Host Timeout:
Hosts must reply to queries within this value in seconds or be
dropped from the group.
Leave
The amount of time the host waits to receive an new IGMP join
Timeout:
message after leaving the current group. If it does not receive a
join message in the specified time, it times out.
IGMP Max Specify the maximum number of groups a host can join.
Groups:
For Snooping and Proxy:
LAN1-4, 2.4, Select Enable to enable IGMP on this interface.
and 5 GHz
Wireless:
Click Apply to save your settings.
D-Link DWR-961 User Manual 85