Pptp + Static Ip Or L2Tp + Static Ip Connection - D-Link DIR-806A User Manual
Wireless ac750 multi-function router
Hide thumbs
Also See for DIR-806A:
- User manual (197 pages) ,
- Quick installation manual (49 pages) ,
- User manual (180 pages)
Table of Contents
Advertisement
DIR-806A Wireless AC750 Multi-Function Router
User Manual
PPTP + Static IP or L2TP + Static IP Connection
Fill in the IP Address and Netmask fields.
In the Gateway IP address field, enter the IP address of the gateway used by this WAN
connection.
In the Primary DNS server field, enter the address of the primary DNS server.
As a rule, the specified settings are enough to configure a non-protected connection of the selected
type. If you need to specify additional settings, open the expert settings mode. To do this, use the
switch in the bottom left corner of the page.
Figure 39. Configuring PPTP + Static IP WAN connection.
Page 59 of 233
Configuring Device (Router Mode)
Advertisement
Table of Contents
