Table of Contents
Advertisement
Section 3 - Configuration
Select Static IP if your IP information is provided by your Internet Service Provider (ISP). Click Save at any time to save the
changes you have made on this page.
IP Address
Enter the IP address provided by your ISP.
Subnet Mask
Enter the subnet mask provided by your ISP.
Default Gateway
Enter the default gateway address provided by your ISP.
Primary DNS Server
Enter the primary DNS server IP address provided by your ISP.
Secondary DNS Server
Enter the secondary DNS server IP address assigned by your
ISP.
MTU
Maximum Transmission Unit - you may need to change the
MTU for optimal performance with your ISP.
MAC Address Clone
The default MAC address is set to the Internet port's physical
interface MAC address on the router. You can replace the
Internet port's MAC address with the MAC address of a
connected client.
D-Link G403 User Manual
IPv4 - Static IP
Advanced Settings...
32
Advertisement
Table of Contents
