Static Ip - D-Link DWR-922 User Manual

Section 4 - Configuration
IP Address: Enter the IP address assigned to your network connection.
Subnet Mask: Enter the subnet mask.
Default Enter the default gateway.
Gateway:
Primary DNS Enter the primary DNS server.
Server:
Secondary DNS Enter the secondary DNS server.
Server:
MTU: You may need to change the Maximum Transmission Unit (MTU)
for optimal performance. The default value is 0.
MAC Address: The default MAC address is set to the WAN port's physical interface
MAC address on the router. It is not recommended that you
change the default MAC address unless required by your ISP. You
can use the Clone button to replace the WAN port's MAC address
with the MAC address of your PC.
NAT disable: Enabling this option will disable the NAT function of the DWR-922,
allowing it to act as a link for your devices to your Internet
connection, but without routing functions.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWR-922 User Manual

Static IP

10