D-Link AC750 Quick Install Manual

Wireless dual band router
Hide thumbs Also See for AC750:


Quick Links

Wireless AC750
Dual Band Router
Quick Install Guide


Table of Contents

Summary of Contents for D-Link AC750

  • Page 1 DIR-813 Wireless AC750 Dual Band Router Quick Install Guide...
  • Page 2: Package Contents

    Package Contents DIR-813 Wireless AC750 Dual Band Router Power Adapter Ethernet Cable Wi-Fi Configuration Card Quick Install Guide If any of the above items are missing, please contact your reseller. Minimum Requirements Network Requirements: • An Ethernet-based broadband modem Web-based Configuration Requirements Computer with the following: •...
  • Page 3: Hardware Overview

    Hardware Overview Power LED A solid green light indicates a proper connection to the power supply. Internet LED A solid green light indicates a connection to the Internet port. A solid green light indicates a successful connection using WPS. The light WPS LED will blink during the WPS process.
  • Page 4: Before You Start

    Before you Start • Users with DSL providers - If you are using a PPPoE connection, you will need your PPPoE user name and password. If you do not have this information, contact your Internet provider. Do not proceed until you have this information. •...
  • Page 5 Connect another Ethernet cable from the Ethernet port on your computer to one of the LAN ports on the router. You can also connect wirelessly to the router with your computer. Use the supplied Wi-Fi Configuration Card for the Wi-Fi network name (SSID) and Wi-Fi password of the router. Complete steps 4 and 5 before attempting to connect.
  • Page 6 Plug the power adapter into your router and connect to an available power outlet or surge protector. If the Power LED does not light up, verify the power adapter is plugged in a working outlet or power strip. INTERNET 12V --1.5A POWER Wireless Computer*...
  • Page 7 Configuration Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and enter http://dlinkrouter.local./ or the IP address of the router ( Enter your router password. If you have not created a password yet, leave the password blank and click Login to continue. Select your Internet type from the drop-down menu: DHCP (dynamic) is most commonly used with cable Internet, PPPoE (common with DSL), or Static.
  • Page 8 If you selected DSL (PPPoE), enter your PPPoE user name and password supplied by your ISP (Internet Service Provider). If you selected Static IP, enter the IP information and DNS settings supplied by your ISP.
  • Page 9 For both the 2.4GHz and 5GHz bands, create a name for your Wi-Fi Network and a password. Your wireless devices (i.e., tablets, smartphones, and laptops) will need to have this information entered to be able to connect to your wireless network. Click Connect at the bottom to continue. Your router will now connect to the Internet.
  • Page 10: Troubleshooting

    Troubleshooting How do I connect my wireless devices to the DIR-813 router? 1. Open your wireless network utility that displays available wireless networks. 2. Select the Wi-Fi Network name you assigned in the wizard and connect. Note: If you did not run the setup wizard or you reset the router to its default settings, refer to the Wi-Fi Configuration Card included for the default Wi-Fi Network Name and Wi-Fi Password.
  • Page 11: Gpl Code Statement

    Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.
  • Page 12: Technical Support

    June 11, 2015 ©2015 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. iPhone, iPad, and iPod touch are registered trademarks of Apple Inc.

Table of Contents