Data Traffic; Measured Variables And Statuses - Siemens SENTRON PROFINET Proxy SPP2000 Manual

Data traffic

6.1

Measured variables and statuses

The measured variables and status information of the SENTRON devices are available to the
higher-level power management system or automation system via SPP2000.
The measured variables include, for example:
• The measured values
• The maximum/minimum values of the measured values
• The energy values
The status information includes, for example:
• The set limit values
• The device statuses
You can find a detailed description of the measured variables in the manuals of the relevant
SENTRON device.
The measured variables and status information are offered both in cyclic data traffic and
acyclic data traffic.
Transfer of measured variables and statuses
The measured variables and statuses are transferred as follows:
• Cyclic data traffic via GSDML modules
• Acyclic data traffic via data sets
• Acyclic data traffic via PROFIenergy profiles
See also
Further documentation (Page 9)
Introduction (Page 5)
PROFINET Proxy SPP2000
Equipment Manual, 03/2022, L1V30814715D-01
6
33