Kemper KHS Mini Control System MASTER 2.0 Installation And Operating Instructions Manual page 65

Logbook
Ill. 6.7.5 Opening the CSV log file dialogue
The KHS Mini Control System have a facility
to be used as measuring instruments. To do
this, the Control System that are connected
to a sensor, as described in Chapter 6.3, are
configured. Use the "Datalogging" function
to generate, delete and save the recorded
measurement data records in the form of a
CSV file on the PC. Up to 12 million lines can
be backed up. Click the
K410068602008-00 / 09.2018
You can use the "Logbook" function to
open and save the event log as a CSV
file. The event log documents the water
exchange operations, error messages
and configuration changes made by the
Kemper KHS Mini Control System.
Based on the documentation about the
location, duration
exchange and
recordings can be made across a
defined time period to verify the state
of hygiene of
system. To open the CSV file, click
OPEN LOGBOOK AS
window then opens, where you can
select whether the flushing log should
be saved or if it should be immediately
opened (see Fig. 6.7.5).
CREATE LOGFILE button to generate the
current CSV file, which is not yet completely
full. Click the CSV file to open a dialogue as
shown in Fig. 6.7.6. Here you can select
whether the flushing log should be saved or
immediately opened. Use the
open a query as shown in Fig. 6.7.7. Click
OK to delete the selected file.
65
of the water
the temperatures,
the drinking water
CSV. A dialogue
button to