Device Settings - Kemper KHS Mini Control System MASTER 2.0 Installation And Operating Instructions Manual

Other settings
In the "DEVICE
interface, the individual KHS Mini Control
Selection interface
K410068602008-00 / 09.2018
The KHS Mini Control System -MASTER 2.0- can activate an internal
buzzer in case of faults. If the related button displays
buzzer is activated.
If the related button displays
Using the drop-down menu you can also customise the language
setting of the control.
SETTINGS" menu
The "DEVICE SETTINGS" menu interface is a dynamic interface.
The selection interface of the installed KHS Mini Control System
are shown on the left-hand side. Click on the desired KHS Mini
Control System to open the relevant input box.
The changes must be written into the control after
every change in the input box. If another KHS Mini
Control System is selected immediately after a
change in the selection interface, the changes are
automatically discarded.
, the alarm buzzer is not activated.
System with integrated actuators and
sensors are logically linked to each other.
35
, the alarm