Kemper KHS Mini Control System MASTER 2.0 Installation And Operating Instructions Manual page 59

Define times
After a line type has been selected,
define the times. A starting and stopping
time has to be stated for the
"Datalogging" line type. Furthermore,
the desired weekdays can be selected
from a drop-down list. Click in the box of
the respective weekday to activate it with
a check mark. The interval time states
the storage rate of the measurement
values.
Save settings
For the new parameters of the input
box to become effective, the settings
must by saved by clicking the WRITE
TO CONTROL button.
K410068602008-00 / 09.2018 59