Operating Modes - Kemper KHS Mini Control System MASTER 2.0 Installation And Operating Instructions Manual

In the "OPERATING
interface, the control-specific TIMERS are
configured for the KHS Mini Control System.
Depending on the control type, a TIMER
1
Selection interface
1
K410068602008-00 / 09.2018
MODES" menu
In the "OPERATING MODES" menu interface, you will
find the selection interface of the added KHS Mini
Control System on the left-hand side. Click the desired
KHS Mini Control System to open the input box.
The changes must be written into the
control after every change in the
input
Control
immediately after a change in the
selection interface, the changes are
discarded.
50
defines flushing times,
intervals, backup times, routine intervals,
temperature flushing etc.
2
box. If another
System
measurement
KHS Mini
is selected