Valve Manual Mode - Kemper KHS Mini Control System MASTER 2.0 Installation And Operating Instructions Manual

3.1.2.7 Valve manual mode

With the KHS Mini Control System -
MASTER 2.0-, it is possible to run a
function test of the valves using the
"Valve manual
Furthermore, the
Maintenance:
A function test is recommended after configuring the "Device settings"
submenu to rule out possible errors immediately.
Valve manual mode
3.1.2.8 Network setup
To establish a connection between the PC
and the KHS Mini Control System -
MASTER 2.0-,
Connection
PC ↔ MASTER
PC ↔ LAN ↔ MASTER
The following parameters are configured as factory defaults:
 IP-Adresse: 10.1.23.150
 Subnet: 255.255.255.0
 Gateway: 10.1.23.1
K410068602008-00 / 09.2018
mode" submenu.
valves can be
Select system crtl.
the required network
Description
The IP addresses of the two devices should not differ greatly
from each other.
You can obtain the appropriate parameters for integration
into your network from your system administrator
individually
maintenance. The functions are shown in
the following illustration.
Automatic mode
Open
Closed
configurations can be set up in the
"Network setup" submenu.
28
addressed during