Information; Precautions; Important Advice To The Operator - Kemper KHS Mini Control System MASTER 2.0 Installation And Operating Instructions Manual

INFORMATION

For installation, maintenance and operation
Installation and operation
Read the manual and follow the instructions
before installation!
Installation and maintenance must be carried
out by qualified plumbers.
Provide the manual to the plant operator and
keep on hand for further reference!
Make sure that the installation location is
frost-proof and not prone to flooding.
Priority must be given to the national
standards and provisions
installations and accident prevention.
Warranty
No warranty in case of:
- Non-compliance with the manual.
- Damage due to incorrect installation.
- Unauthorised modification of the product.
Use
Thanks to the MASTER/SLAVE technology,
KHS Mini Control System can be used to
implement specific
measures to maintain
hygiene. For each
The reliability of the supplied unit is
▪
only ensured when used as intended.
Never exceed the limits stated in this
documentation under any circum-
stances
During assembly and maintenance,
▪
make sure that the control is not
switched on.
K410068602008-00 / 09.2018
on sanitary
water exchanging
drinking water
individual water
exchange group, time or temperature-
controlled water
configured individually or according to a
specified water volume.
Only skilled professional personnel are
permitted to operate electrical systems in
accordance with DIN EN 50110-1.
Do not use the device for other purposes
than described
interiors. Any other uses constitute misuse.
Warnings used in the manual:
Warning!
Highlights risks that may result
in injury, material damage or
contamination
water.
Note!
Highlights risks that may result
in damage to the plant or
dysfunction.
Use only original/approved spare parts
▪
 otherwise no warranty claims will be
recognized.
Be sure to comply to local regulations
▪
on waste recycling and disposal.
3
exchange can
above in non-freezing
of drinking
be