Entering The Pin1 Code - NTT docomo Foma D900i Manual

Setting the PIN Codes (continued)
4
Reenter the new PIN2 code and press
The PIN2 code is changed.
• When you could not enter the current PIN2 code correctly, repeat from Step 3. When you fail to enter
the current PIN2 code 3 times, the screen for entering the PIN lock cancel code appears (see p.165).
• If the second entry of the new PIN2 code did not match the first entry, repeat from Step 3.

Entering the PIN1 Code

When PIN1 Entry ON/OFF is set to on, the PIN1 code entry screen appears when
turning the power on. Unless you entered the correct PIN1 code, you can neither make
a call nor perform communication.
Press and hold down
1
• According to the services you subscribe to, the service provider selection screen appears.
In such a case, select the service provider and press
2
Enter the PIN1 code and press
The Standby screen appears.
• The default PIN1 code is "0000". You can change it to another number (see p.163).
• Entered numbers are masked with a series of "̲".
• If you make a mistake, use
• If you could not enter the correct PIN1 code, you can try again. If you fail to enter the PIN1 code
3 times, the screen for entering the PIN lock cancel code appears (see p.165).
164
(選択).
to turn the power on.
(選択).
to delete the "̲" and enter the correct number.
(選択).