List of Symbols and Special Characters
In addition to the symbols listed in the character assignment tables, the symbols listed
below can also be entered.
• The screen display may differ from characters and symbols shown in the list:
When using symbols and pictographs in the mail body
•
i-mode mail
If the double-byte symbols shown with
•
i-mode compatible mobile phone, they may not be displayed properly at the receiving side.
Messages and mail containing pictographs 2 that are sent to i-mode incompatible mobile phones will not
•
be displayed correctly.
•
Short Message (SMS)
If single-byte symbols, double-byte symbols or pictographs are used in the message body of Short
•
Message (SMS), they may not be displayed properly at the receiving side.
■
Symbols Entry procedure (see p.237, 239)
Single-byte
Double-byte
*
indicates a linefeed. (This is available only when entering text in the body of i-mode mail/Short
Message (SMS), editing a signature/video telop, or entering characters of i-
• When only single-byte characters can be entered, only single-byte symbols can be entered.
• Single-byte symbols cannot be entered when entering "きごう" and converting in the Kanji mode.
■
Pictographs 1 Entry procedure (see p.241)
■
Pictographs 2 Entry procedure (see p.241)
262
or pictographs are sent to any phone other than an
*
ppli.)
α