Adjusting The Ring Volume While The Terminal Is Ringing - NTT docomo Foma D900i Manual

Ring Volume

Adjusting the Ring Volume While the Terminal is Ringing

Ring Volume can be set to one of 7 levels, from level 0 to level 6.
This section describes how to adjust the sound volume of the other party while the
terminal is ringing.
• Adjusting the Ring Volume level in standby (see p.136)
• Alternatively, you can set your FOMA terminal to gradually increase ("Step Up") or decrease
("Step Down") the volume in standby. You cannot select "Step Up" or "Step Down" while
the terminal is ringing.
1 While the terminal is ringing, press
2 Use to select the Ring Volume level.
The ringtone plays at the adjusted volume level. If no operation for more than 2 seconds, the Ring
Volume level is set automatically and the call reception screen reappears.
•
When "レベル0" is selected, the ringtone does not sound.
•
When you press
•
You can press
of the call).
N o t e
•
In steps 1 and 2, you can adjust the volume with
•
If Ring Volume is set to "レベル0", the ringtone does not sound when there is an incoming call. In the main
display or Inspiration window,
Current sound level
(設定), the setting is saved and ringtone plays at this volume level any time.
to set the volume level and answer a call (The setting is saved after ending
appears.
[Default] レベル4 Level4
.
instead of .
61