About Multiaccess - NTT docomo Foma D900i Manual

About Multiaccess

Your FOMA terminal can make a voice call and packet communication at the same
time. It can further provide Short Message Service (SMS) at the same time.
You can use a maximum of the 3 circuits shown below at the same time:
Voice call
Packet communication (i-mode, i-mode mail, packet communication
with your FOMA terminal connected to a PC, and so on.)
Short Message Service (SMS)
N o t e
•
During Multiaccess, each individual circuit is billed.
•
Since Videophone and 64K data communication do not support Multiaccess, you cannot use voice call or
i-mode during a videophone call or 64K data communication. However, you can receive messages in Short
Message Service (SMS) (but you cannot send messages).
•
For details about combinations of Multiaccess, see p.265.
Main operations that can be performed with Multiaccess
Connecting to i-mode during a voice call
1
Press during a voice call.
The active list appears.
2 Display i-mode sites.
1Select "ｉモード" and press
i-mode Menu appears.
2Select " Menu" and press
iMenu appears.
During a voice call
• You can press
talking screen and the site display screen.
• When site display ends, your FOMA terminal returns to the talking screen.
• To finish talking with the site display screen displayed, switch to the talking screen and press
.
194
(選択).
(選択).
, select "音声通話" or "ｉモード", and press
1 circuit
1 circuit
1 circuit
Connecting to a voice call and i-mode at the same time
(選択) to switch between the