Setting The Pin Codes - NTT docomo Foma D900i Manual

Change Terminal ID
Changing the Terminal ID Number
1
In standby, select "設定"
Menu.
2
Enter your current terminal ID number and press
3 Enter a new terminal ID number and press
• The new terminal ID must be 4- to 8-digits. "#" and "
• If you make a mistake, use
4
Select "はい" and press
Your terminal ID number is changed.
• To not change it, select "いいえ".

Setting the PIN Codes

The PIN codes include PIN1 code and PIN2 code.
• The PIN1 Entry ON/OFF setting enables you to specify whether to require entering the PIN1
code when the power is turned on.
• You can change the PIN1 code and PIN2 code to any numbers you like.
• PIN1 code and PIN2 code (see p.35)
[Set PIN1 Entry ON/OFF]
Setting to enter the PIN1 code when turning the power on
1
In standby, select "設定"
定" from Menu.
2
Select "1.ON" and press
• If you select "ON" when the PIN1 Entry ON/OFF setting is on or if you select "OFF" when the
setting is off, Step 3 is not necessary.
• To set to not enter the PIN1 code, select "2.OFF".
3
Enter the PIN1 code and press
Entering PIN1 code is set to be requested.
• The default PIN1 code is "0000".
162 162
"プライバシー"
• The default terminal ID number is "0000".
• Entered numbers are masked with a series of "̲".
• If you make a mistake, use
reenter the correct number.
• When the entered terminal ID number is not correct,
"暗証番号が違います (Wrong ID code is input)"
appears followed by the Standby screen.
• When no terminal ID number is entered for 15
seconds, the Standby screen is automatically
displayed. Repeat the operation from the beginning.
(選択).
" cannot be used.
to delete the number and reenter the correct number.
(選択).
"プライバシー"
(選択).
(選択).
[Default] 0000
"暗証番号の変更" from
(選択).
to delete the "̲" and
[Default] OFF
"PIN1入力ON/OFF設