Making A Videophone Call - NTT docomo Foma D900i Manual

Making a Videophone Call

1 Enter a phone number.
• The procedure is the same as that for entering a phone number for a voice call (see p.48).
• You can select an image to be sent to the other party instead of your self image from still images
or Chara-den. The setting is not saved. If you select
selection screens of "1.イメージ", "2.キャラ電" appear. (You cannot select "3.代替画像選択"
when PIM Lock is set.)
■ To send still images
1Select "1.イメージ" and press
• Repeat from Steps 2 in Switching a sending image to a still image (see p.79)
■
To send Chara-den
1Select "2.キャラ電" and press
• Following Steps 2 in Switching Chara-den (see p.83)
• In addition to the above, you can perform the following operations related to Videophone from
the submenu. Press
2. 自画像送信ON Send Self Image on
2. 自画像送信OFF Send Self Image off
4. 通信速度32K Communication speed 32 K
4. 通信速度64K Communication speed 64 K
2 Press (
A videophone call is made to the displayed phone number.
• Charging starts from when "TV電話接続 (Connecting a videophone call)" appears.
• You can change a setting such as the screen display mode from the submenu during a
videophone call (see p.78).
3 Press (
The hands-free function is set and you can hear the receiver's voice in the speaker.
• To restore the hands-free function off, press
hands-free function is restored to off).
• When a switch-equipped earphone/microphone (optional) is connected, the receiver's voice is
heard in the earphone/microphone regardless of the hands-free setting.
• When the hands-free function is off, the receiver's voice is heard in the earpiece.
• To adjust the earpiece volume, use
procedure: (see p.60)
4 To end the call, press
Call time is displayed for about 5 seconds and the Standby screen reappears.
• To quickly return to the Standby screen, press
サブメニュー , select a function, and press
( )
Submenu
).
TV
).
to select the volume and press
.
"3.代替画像選択" from the submenu, the
(選択).
(選択).
Description
Select whether or not to send your self image.
Select a communication speed per call.
( ) again. (When the call ends, the
(OK).
選択
( ):
(設定). Operating
73