Handling The Adapter (And Charger) - NTT docomo Foma D900i Manual

SAFETY PRECAUTIONS –Always follow these directions– (continued)

Handling the adapter (and charger)

Use care to not short circuit the recharging terminal when the adapter is
connected to a wall outlet or cigarette lighter socket. Do not touch the
recharger terminal with your hands or fingers, or some other part of the body.
• Doing so could cause a fire, equipment failure, electric shock or other injury.
Do not touch the adapter (and charger) cord or wall outlet with wet
hands.
• Doing so could cause electric shock.
Do not use the AC adapter and desktop holder in bathrooms or other
potentially high humidity locations.
• Doing so could cause electric shock.
Do not expose the adapter (and charger) to water.
• The adapter may overheat, cause electric shock or be damaged if exposed to water,
pet urine or other liquids. Do not use the adapter in locations where it could be
exposed to liquids.
When the adapter (and charger) is not to be used for a prolonged
period, disconnect the power plug from the wall outlet.
• Failure to do so could result in electric shock, fire, or equipment failure.
Never use the adapter (or charger) when it has a damaged power cord.
• Failure to do so could result in electric shock, smoke or fire.
If the adapter (and charger) is exposed to water or other liquid, immediately
disconnect the power plug from the wall outlet or cigarette lighter socket.
• Failure to do so could result in electric shock, smoke or fire.
When connected to a wall outlet, make sure that the AC adapter does
not come into contact with metallic straps or other metal objects and
the plug is properly seated.
• Failure to do so could result in electric shock, short circuit, or fire.
Do not disassemble or alter the adapter (and charger).
• Doing so could result in electric shock, fire, or equipment failure.
Use the designated power source and correct voltage.
• Use of incorrect voltage could cause a fire or equipment failure. In addition to that,
using the FOMA terminal overseas could cause an equipment failure.
AC adapter: 100V AC (Be sure to connect to only a domestic 100V AC outlet for
home use)
DC adapter: 12V DC, 24V DC (for cars with a negative ground)
Use only the specified fuse for the DC adapter.
• Use of the incorrect fuse could cause a fire or equipment failure. Check the instruction
manual for details of the correct fuse to use.
16
WARNING