Displaying Unit Uptime - Nortel 4500 Series Overview-System Configuration

!
! add ports to this VLAN
! in this case all ports
vlan members add 150 ALL
vlan ports ALL priority 3
!
! igmp
! you could disable proxy on vlan 100
vlan igmp 100 proxy disable
!
! -------------------------------------------------------
! Examples of changing interface parameters
! -------------------------------------------------------
! change speed of port 3
interface Fastethernet 3
speed 10
duplex half
exit
!
! change speed of port 4
interface Fastethernet 4
speed auto
duplex auto
exit
!
!
! -------------------------------------------------------
! SNMP configuration
! -------------------------------------------------------
snmp-server host 192.168.100.125 private
snmp-server community private
!
!
exit
end
! -------------------------------------------------------
! Finished
! -------------------------------------------------------

Displaying unit uptime

You can display the uptime for each unit in a stack. Unit stack uptime
collects the stack uptime for each unit in a stack and reports this information
when requested. You can determine how long each unit is connected to the
stack. You can use the CLI commands to display the unit uptimes.
Copyright © 2007, Nortel Networks
.
Features of the Nortel Ethernet Routing Switch 4500 Series 141
Note: To add comments to the ASCII configuration file, add an
exclamation point (!) to the beginning of the line.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
Nortel Networks Confidential