Nortel 4500 Series Overview-System Configuration page 218

218 Switch administration tasks
Copyright © 2007, Nortel Networks
.
Field
SerNum
AuthenticationTraps
Reboot
AutoPvid
ManagementVlanId
StackInsertionUnitNumber
AutoUnitReplacement
Enabled
NextBootMgmtProtocol
CurrentMgmtProtocol
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
Description
Displays the individual switch serial
number.
Click enable or disable. When you
select enabled, SNMP traps are sent
to trap receivers for all SNMP access
authentication. When you select disabled,
no traps are received.
To view traps, click the Trap toolbar
button.
Action object to reboot the agent.
Reset - initiates a hardware reset.
The agent attempts to return a response
before the action occurs. If any of
the combined download actions are
requested, neither action occurs until the
expiration of s5AgInfoScheduleBootTime,
if set.
Click enabled or disabled. When you
select enabled, Port VLAN ID (PVID) is
automatically assigned.
The current management VLAN ID.
The unit number to be assigned to the
next unit that joins the stack. You cannot
set the value to the unit number of an
existing stack member. When a new
unit joins the stack, and the value of this
object is used as its unit number, the
value reverts to 0. If the value of this
object is 0, it is not used to determine the
unit number of new units.
Determine whether auto-unit-replacement
is enabled or disabled.
The transport protocols to use after the
next boot of the agent.
The current transport protocols that the
agent supports.
Nortel Networks Confidential