Setting Port Speed - Nortel 4500 Series Overview-System Configuration

176 Switch administration tasks
"show interfaces parameters" (page 176)
variables for the show interfaces command.
show interfaces parameters
Parameters and
variables
names <portlist>
gbic-info
LINE

Setting port speed

To set port speed and duplexing using the CLI, see the following sections:
•
•
•
•
speed command
The speed command sets the port speed.
The syntax for the speed command is
speed [port <portlist>] {10 | 100 | 1000 | auto}
Run the speed command in Interface Configuration command mode.
"speed parameters" (page 176)
the speed command.
speed parameters
Parameters and
variables
port <portlist>
Copyright © 2007, Nortel Networks
.
"speed command" (page 176)
"default speed command" (page 177)
"duplex command" (page 177)
"default duplex command" (page 178)
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
describes the parameters and
Description
Display interface names; enter specific ports to see
only those ports .
Display GBIC details.
Display a list of existing ports with names (displays
interface names).
describes the parameters and variables for
Description
Specify the port numbers to configure the speed. Enter
the port numbers you want to configure.
Nortel Networks Confidential