Shortcut Menus - Nortel 4500 Series Overview-System Configuration

Shortcut menus

Each object in the device view has a shortcut menu that appears when you
right-click the object. The switch shortcut menu provides access to basic
hardware information about the switch and to the graphing dialog boxes for
the switch. An example of this is illustrated in
(page
Switch unit shortcut menu
The following table
describes the commands on the switch unit shortcut menu.
Switch unit shortcut menu commands
Command
Unit #
Edit
Show Port
Tooltip
Refresh Port
Tooltip
Refresh PoE
Status
The port shortcut menu, as shown
provides a fast way to edit and graph a single port; however, you can reach
the same options from the menu bar or from the toolbar..
Copyright © 2007, Nortel Networks
.
47).
"Switch unit shortcut menu commands" (page 47)
Description
Display the unit number.
Open a read-only dialog box that provides basic hardware
information about the switch.
Display a pop-up window (tooltip) that contains the name of the
port and the port speed when you move the mouse over a port
in the JDM front panel view. By default, Show Port Tooltip is
enabled. Clear the Show Port Tooltip to disable it.
Refresh the port tooltip information after you assign a new
port name to it, or after you reconfigure the port speed. Click
Refresh Port Tooltip to view updated information.
Refresh the status of PoE ports on the switch (available only on
4500-PWR switches).
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
Java Device Manager 47
"Switch unit shortcut menu"
in"Port shortcut menu" (page 48)
Nortel Networks Confidential