Table of Contents
Advertisement
Printing
Do not touch the machine while it is printing.
WARNING
The table and print head move and may cause unexpected injury.
Never insert your hand or fingers into the opening of the front cover or table.
CAUTION
The print heads move at high speed inside the cover. Contact with the print heads may
cause injury.
After setting the media and setting the print start position, carry out the procedure below. The printer will be ready to
receive data and perform the printing.
Procedure
Close the front cover.
Check that the top menu is displayed.
If it is not, press
Check that the Base Control Panel displays "Now printable state."
Printing Does Not Work in the Following Cases
The printer does not move if the front cover is open. Also, do not open it while printing is in progress. If you
do, the printing will be aborted.
The printer does not move if the print start position is not set. Check that the Base Control Panel displays
"Now printable state."
.
2-4 Starting to Print
Top menu
W 762mm
Chapter 2: Operation
33
Advertisement
Table of Contents
