Replacing the Ink-Absorbing Material
TIME FOR
SPONGE REPLACE
Be sure to follow the procedure exactly and only touch the specified locations.
CAUTION
Otherwise sudden movement of the machine may cause injury.
Replacement
∂
∑
∏
If the screen shown in the figure appears, replace the ink-absorbing
material with a new one.
Remove any media from the table and close the front cover.
F 1
F 2
F 3
F 4
F 5
F 6
Screws
Remove the right side cover.
3-4 Replacing Parts That Wear Out
Ink-absorbing material
Press the SERVO OFF to switch off the sub power.
Switch off the main power switch.
Chapter 3: Maintenance
51