3-3 Cleaning the Heads Using the Cleaning Kit
4.
Reattach the covers and quit the manual cleaning mode.
Press
An operation to exit from the manual cleaning mode starts.
CLOSE MAINTENANCE
COVER
Close the front cover and press
The sub power switches off.
5.
Perform a test print to verify the results of the procedure.
Perform a test print to check the results.
Perform automatic cleaning several times as required.
46
Chapter 3: Maintenance
Screws
.
Screw
Screws
Attach the right side cover and close the front cover.
When the screen shown in the figure appears, open the
front cover and attach the maintenance cover.
.