Roland FLATJET FLJ-300 User Manual page 26

1-1 About the Machine
Base Control Panel
Display Screen
This displays various setting menus and messages.
The display is a touch panel. You can touch the menus and cursors
on the display to set the menus.
24 Chapter 1: Introduction
SERVO ON
This is the sub power switch for the printer. The machine starts
when you press this switch when the main power switch is on.
F 1
F 2
F 3
F 4
F 5
F 6
SERVO OFF
This is the sub power switch for the printer. The sub power supply
turns off when you press this switch when the machine is powered
up.
Emergency Stop Switch
If you press this in an emergency, the machine op-
eration stops and the sub power supply turns off.
F5 Button
You press this button to enter the machine's main-
tenance mode.
F6 Button
Press this to switch the language shown on the
screen.