Table of Contents
Advertisement
Media sensor
Description
Manual setting is used in the following cases.
Media whose thickness is not uniform
Media whose front edge is not straight
Media whose shape is difficult to be scanned through auto search
Media whose side face contains holes that the sensor passes through.
When you wish to set the start position more accurately.
The media is detected when the [
more accurately, set the distance that the table and lifter move when the cursor is pressed once to a smaller value. You
can change the distance of movement by pressing [JOG] and then changing the value by pressing [INCHING].
Media
] mark of the media sensor changes from white to black. To detect the start position
4-2 Setting the Print Start Position
Select the distance of movement and press
move the lifter close to the media.
When the [
] mark changes to black, press [SET].
Press [OK].
The lifter and table move to the set positions.
Chapter 4: Feature Reference
to
Distance of
movement
63
Advertisement
Table of Contents
