Fine-Adjusting The Print Start Position On The Base Control Panel - Roland FLATJET FLJ-300 User Manual

Fine-Adjusting the Print Start Position on the Base Control Panel

Procedure
Description
You can fine-adjust the print start position using cursors. This adjustment can be performed only when [CURRENT
POS] is selected for the print start position. The print start position set with the cursors are cleared when the first
printing is finished.
4-3 Setting the Print Start Position When Continuing Printing
Press [CHANGE PRINT POS].
Press [CURRENT POS] and then [RETURN].
Use the cursors on the screen to move the lifter and table.
Press [SET PRINT POS].
The screen shown in the figure appears, and the printer is ready to
print.
Chapter 4: Feature Reference 67