1.
Change to the print-head manual-cleaning mode.
F 1
F 2
F 3
F 4
F 5
F 6
F 1
F 2
F 3
F 4
F 5
F 6
MAINTENANCE
CLEANING
OPEN MAINTENANCE
COVER
3-3 Cleaning the Heads Using the Cleaning Kit
Remove any media from the table and close the front cover.
Press the SERVO OFF to switch off the sub power.
Press the F5 button.
Check that the screen displays [MAINTENANCE MODE].
Press the SERVO ON to switch on the sub power.
Press
or
Press
.
When this screen appears, the printer is ready for mainte-
nance.
to select [CLEANING].
Chapter 3: Maintenance
43