Table of Contents
Advertisement
Installing/Mounting
4.2 Installation procedure
4.2
Installation procedure
4.2.1
Drill crank body mounting holes
Refer to the appropriate MWL installation drawing (Page 48) for your Milltronics belt scale.
1. Measure and mark the locations of the mounting holes for each of the crank bodies. The left-
handed unit turns clockwise to raise weights and the right-handed unit turns counter-
clockwise.
2. Drill the holes as specified for 12 mm (1/2") mounting hardware.
14
Milltronics MWL Weight Lifter
Operating Instructions, 11/2011, 7ML19985CR03-03
Advertisement
Table of Contents
