Table of Contents
Advertisement
Appendix A: Customer calculations
Calculation of load reference values
OR
Using the factoring function of the belt scale integrator
If the belt scale system has been pre-calibrated, as in the case of an MWL retrofit, the belt scale
system should be zeroed. The Factor function of the integrator should be used to accurately
determine the value of the calibration weights in terms of the existing span calibration. (See the
integrator manual for more detail.)
58
Calibration reference value in kg/m = grand total in kg
Calibration reference value in lb/ft = grand total in lb
idler spacing in m
idler spacing in ft
Milltronics MWL Weight Lifter
Operating Instructions, 11/2011, 7ML19985CR03-03
Advertisement
Table of Contents
