Table of Contents
Advertisement
Connecting
5.3 Connection procedure
5.3.3
Connect the motor and brake
1. Connect the motor to the control panel using an appropriate power cable (3-phase with
ground), as shown in the diagram below.
2. Connect the brake release to the control panel using an appropriate 2-conductor cable, as
shown in the diagram below.
①
②
Refer to the connection diagram (Page 29) for more details.
32
3RU1611-0DB0
14/22
4 T2
6 T3
2 T1
NO/NC
motor
brake coil
Milltronics MWL Weight Lifter
Operating Instructions, 11/2011, 7ML19985CR03-03
Advertisement
Table of Contents
