Table of Contents
Advertisement
Description
3.3 MWL components
3.3
MWL components
The Milltronics MWL Weight Lifter consists of the following components:
● left-handed and right-handed crank body, each connected to a lifting arm with guide-pin
● torque tube, to connect the left and right crank shafts
● crank handle, to be mounted to either the left or right input shaft (manual version only)
● optional shaft extension which adds 102 mm (4") to the handle shaft length
● base-bar weight to support other supplied calibration weights, or base-bar with integrated
round bar weight
● U-brackets to secure flat bar calibration weights (not required for round bar style)
①
②
③
④
⑤
⑥
⑦
⑧
⑨
Note
Manual version shown. The electronic version features an AC gearmotor in place of the
crank handle.
10
Input shaft (2)
Right-handed crank body
Torque tube
Base-bar weight
Connecting shaft (2)
Left-handed crank body
Crank handle
Guide-pin (2)
Lifting arm (2)
Milltronics MWL Weight Lifter
Operating Instructions, 11/2011, 7ML19985CR03-03
Advertisement
Table of Contents
