Operation
Note
To ensure accurate calibration, you must keep the area between the MWL lifting arms and
the calibration weights clear of build-up during the calibration routine. See Removing
material accumulation (Page 41).
7.1
Operation (manual version)
Applying calibration weights
Simply turn the crank handle until the calibration weights are fully lowered onto the calibration
weight supports of the belt scale. (Please see the manuals for the Milltronics Belt Scale and
Integrator, for the appropriate calibration procedures.)
①
②
③
Milltronics MWL Weight Lifter
Operating Instructions, 11/2011, 7ML19985CR03-03
flat bar calibration weights applied
lifting arms lowered
calibration weight supports (2)
7
37